Quantity |
Description |
|
Price |
|
Set of 4 Load Cells*
Description: Set of Four (4) matched class C 50 KG (110 lb) load cells with 1 meter cables. Protected to IP65 specifications. Maximum hive weight of 200 KG (440 lb) when these four load cells are mounted to a frame. International Orders ship directly from China.
Typical Quantity: 1 lot of 4 cells per system. |
  |
$ 50 |
|
Hive Interface board
Description: Plugs into the 40 pin GPIO header on Raspberry Pi A+, B+, Pi2, Pi3 and Pi Zero models. Eight 6P4C RJ11 jacks accept 4 load cells in parallel, 2 DHT22 Temp/RH sensors, 1 TSL2561 or TSL2591 lux sensor, and 1 tip bucket rain gage.
Typical Quantity: 1 per system. |
  |
$ 25 |
|
Lux (Light) Sensor
Description: TSL2591 Light sensor with 2 meter cord. Plugs into the Hive Interface Board. Wide dynamic range. Measures both IR and visible light spectrums at the hive location.
Typical Quantity: 1 per system. |
  |
$ 14 |
|
Temperature/RH Sensor
Description: DHT22 temperature and relative humidity sensor with 2 meter cord. Plugs into the Hive Interface Board.
Typical Quantity: 2 per system. |
  |
$ 12 |
|
Micro SD Card
Description: Has Raspian image and HiveTool software installed. Plugs into a Raspberry Pi A+, B+, Pi2, Pi3 or Pi Zero.
Typical Quantity: 1 per system. |
  |
$ 15 |
|
WiFi/USB Adapter
Description: Plugs into Type A USB connector and provides WiFi for Raspberry Pi Models A+, B+, Pi2. Provides better signal strength for Pi3. Not for Pi Zero.
Typical Quantity: 1 per system. |
  | $ 15 |
Shipping inside the Continental United States
|
$ 9 |
Shipping outside the Continental United States
|
$ 18 |
Contribution** |
|